Kia Reveal All-New Ceed
A new design for a new generation of Ceed. The Kia Ceed conveys a more self-confident new look – one that is both emotive and precise in its execution.
Lower, wider, and with a longer rear overhang than the car it replaces, the Ceed’s cab-rearward silhouette exhibits a more mature sense of athleticism. Straight lines replace the rounded-off edges of its predecessor, evolving the front of the car with a wider ‘tiger-nose’ grille and lower air intake, and precise, linear shapes framing its ‘face’. The new model features ‘ice cube’ LED daytime running lights as standard, echoing the appearance of earlier GT and GT-Line models. In profile, the sharp, straight lines visually lengthen the bonnet and give the car a more upright stance. A greater sense of maturity and strength is created in its shoulder line, which now runs along a more horizontal plane. The model adopts the wide C-pillar that has become a hallmark of Kia design in recent years, enhancing its cab-rearward stance. This also gives the upper window-line a sleek new ‘half-moon’ shape. At the rear, new LED daytime running lights give the Ceed greater visibility – and recognition – on the road. Paired with straight lines in the bodywork and a subtle rear boot spoiler, the Ceed presents a more stable overall appearance.
From launch, the Ceed five-door hatchback will be available in a choice of 12 paint finishes. A selection of wheels and designs are available, with buyers able to choose from 15-inch steel wheels, 16-inch steel or aluminium alloy wheels, and 17-inch two-tone diamond cut aluminium alloy wheels.
Inside the cabin, the Ceed is more ergonomic than ever, and with higher-quality materials used throughout. The cabin architecture from the most recent Kia vehicles has been adapted for the Ceed, with the dashboard laid out horizontally for a more sculptural, seamless and slimline appearance. This design also creates greater space and a sense of openness for the front passenger, allowing more space in the footwell and a clearer view ahead.
The dash is split into an upper area – for the ‘floating’ touchscreen infotainment system – and lower area, housing controls for audio and heating and ventilation. Driver-centric in its layout, the centre console is angled slightly towards the driver’s seat for ease of use on the move. The interior is finished in a higher proportion of sophisticated soft-touch materials throughout, subtly intensifying the refined and upscale ambience of the cabin. Surfaces are finished with metallic or satin chrome trim, with buyers able to choose from a range of cloth, synthetic leather or genuine leather upholstery. A leather-wrapped steering wheel and gear stick are also available as an option.
Constructed on Kia’s new ‘K2’ platform, the new Ceed is 20mm wider (1,800mm) and 23mm lower (1,447mm) than the outgoing model. Its wheelbase remains the same at 2,650mm, with the front overhang shortened by 20mm (to 880mm), and rear overhang extended by 20mm (now 780mm). The new platform supports the Ceed’s more efficient packaging. The model boasts a larger, 395-litre boot, as well as greater shoulder room for rear passengers, more headroom in the front row, and a lower driving position.
The ride and handling characteristics of the new model have been tuned to elevate the Ceed over its predecessor in terms of dynamism and driver engagement. The new fully-independent suspension system will provide drivers with more agile and immediate handling responses, complemented by revised spring and damper rates and a faster steering rack. The ride has been developed on Europe’s wide variety of road surfaces, remaining comfortable while giving drivers the confidence of tighter body control under cornering and stability at higher speeds. Some of this tuning happened in the UK to ensure the Ceed performs well on our unique roads.
The Ceed range will be powered by a wide choice of powertrains developed to meet diverse buyer needs. Petrol options include an updated version of Kia’s popular 1.0-litre T-GDi (Turbocharged Gasoline Direct injection) engine, producing 120ps, as well as a new 1.4-litre T-GDi power unit. Replacing the earlier 1.6-litre GDI engine, the new ‘Kappa’ 1.4-litre T-GDi engine produces 140ps, four per cent more than its predecessor despite its lower displacement. The engine’s turbocharger ensures a wider torque band than the earlier 1.6-litre engine, making it more responsive in a wider range of driving conditions – while also reducing emissions. A 100ps 1.4-litre MPi (Multi-Point injection) engine will also be available.
The Ceed is also available with Kia’s all-new ‘U3’ diesel engine. Designed to go beyond the stricter limits laid down by the latest Euro 6d TEMP emissions standard, the new ‘U3’ 1.6-litre CRDi (Common-Rail Direct injection) uses Selective Catalytic Reduction (SCR) active emissions control technology to significantly reduce emissions. The new engine therefore produces less carbon dioxide, particulate matter and NOx compared to earlier Kia diesel engines. Available with a choice of power outputs (115 and 136ps), the new 1.6-litre diesel produces 280 Nm of torque. Fitted with the new engine, the Ceed’s carbon dioxide emissions are expected to fall below 110 g/km on the new Worldwide Harmonised Light Vehicle Test Procedure (WLTP), when converted to the New European Driving Cycle (NEDC).
Every engine will be paired with a six-speed manual transmission, while the new 1.4-litre T-GDi and 1.6-litre CRDi engines will also be available with Kia’s seven-speed double-clutch transmission.
Innovation sits at the heart of the Kia Ceed, which will become the most high-tech car in its class when sales commence.
The cabin features a wide range of new technologies to enhance comfort and convenience for occupants. The ‘floating’ infotainment system is available as either a 5.0- or 7.0-inch touchscreen audio system, or 8.0-inch touchscreen navigation system, with buyers able to specify a powerful JBL Premium sound system with Clari-Fi music restoration technology. Standard technologies include full Bluetooth smartphone integration, as well as automatic lights and keyless entry.
A Drive Mode Select system will enable owners to tailor their driving experience, with Normal and Sport modes. Drivers can use Drive Mode Select to alter the level of effort required to steer the car, while each mode subtly changes the character of the engine. Normal mode maximises the potential for greater fuel efficiency and offers more relaxed steering inputs. Sport mode enhances throttle responses, enables faster acceleration – from a standstill and at speed – and adapts the steering to offer additional weight and more decisive responses to driver inputs.
An optional heated windshield – with nearly-imperceptible wires to gently heat the glass – makes the Ceed easier to live with in colder months. The first time this technology has featured in a Kia, it melts away frost, ice and windscreen mist at the push of a button. A wireless smartphone charger, heated and ventilated front seats and heated rear seats are also available.
On the outside, the Ceed is fitted with newly-designed ‘ice cube’ style LED daytime running lights (DRLs) as standard. Previously, these were only featured on GT and GT-Line models, embedded into the front bumper – the ‘ice cube’ DRLs are now integrated into the headlamp units on every model in the Ceed range. Full LED headlamps are also available as an option.
The Ceed’s optional ECO Pack features an Active Air Flap, which closes and opens depending on engine cooling requirements, enhancing the car’s aerodynamic efficiency for greater fuel economy. The ECO Pack also features an underbody cover and lower suspension, aiding air flow beneath the vehicle, as well as low rolling resistance Michelin tyres.
In addition to the car’s seven standard airbags, advanced driver assistance technologies further enhance occupant protection, using active safety systems to mitigate the risk of collisions. Standard safety technologies will include High Beam Assist, Driver Attention Warning, Lane Keeping Assist and Forward Collision Warning with Forward Collision-Avoidance Assist.
A first for any Kia sold in Europe, the Ceed is available with Lane Following Assist, a ‘Level Two’ autonomous driving technology. Lane Following Assist tracks vehicles in front of the Ceed in traffic, and identifies appropriate spaces in other lanes to move in to safely to gain more ground in heavy congestion. It detects road markings to keep the Ceed in its lane on the motorway, and controls acceleration, braking and steering depending on the convoy of vehicles in front. The system uses external sensors to maintain a safe distance from the vehicle in front, operating between 0 and 81mph.
Additional available technologies include Smart Cruise Control with Stop & Go, Blind Spot Collision Warning, Rear Cross-Traffic Collision Warning, Smart Parking Assist, and pedestrian recognition with haptic steering wheel warnings for the Forward Collision-Avoidance Assist system.
Every Ceed is equipped as standard with Kia’s Vehicle Stability Management (VSM), ensuring stability when braking and cornering by controlling the car’s Electronic Stability Control (ESC) if it detects a loss of traction.
The Kia Ceed will enter production in March 2018 at Kia’s Žilina manufacturing facility in Slovakia. The Kia Ceed will reach left-hand-drive markets in Europe first from the end of June 2018, the Ceed will be covered by Kia’s quality promise, with the brand’s industry-leading seven-year, 100,000 mile warranty as standard.